STAEDTLER粘土8432M产品参数
Composition: | waxes, oil, fillers, pigments |
Density: | approx. 1,5 g/cm, de-aired |
Color: | brown |
Odor: | neutral |
α(Linear Shrinkage Coefficient) | constant 2,1 X 10~4K-1 (0- 20°C132- 68°F) |
Shelf life: | at least 24 months at temperatures from 0°C32°F to 30°C/86°F |
Working temperature: | 55°C/131°F- 60°C/140°F |
Degree of hardness: | medium |
Shore hardness A | 62 (20°C/68°F) |
STAEDTLER-hardness AH/ g: | 23°C/73, 4°F: 4.500 40°C/1 04°F: 800 60°C/140°F: 250 |
Solubility: | insoluble in water, partially soluble in organic solvent |
Toxicology; | Marsclay Medium is toxicologically harmless, certified by ACMI, USA. |
STAEDTLER粘土8432M产品介绍
Instruction of use:
As a permanently malleable compoundMarsclay Medium remains pliable and can be used again and again.
When heated to 55°C/131°F- 60°C/140°F, the clay becomes soft and pliable.
The heating period is about 5 hours (depending on type and loading of oven).
At room-temperature up to 25°C/77°F the models keep their contours and edges.
By hot conditions or direct solar radiation softening of the surface occurs.
Wood, polystyrene and hard foams can be used as base materials.
Base materials and the warm modelling clay bond without the need of adhesives.
Grave quantities should be applied in layers.
By applying of bigger masses, commend to warm up the base layer for an optimum bond.
Once the top surface has cooled down, the model can be shaped by hand or milling machines.
Modifications can be made to the finished model simply and dust free.
Due to the special bonding qualities small amounts of material can be applied.
In case of serious changes, the roughening of the previous surface is recommended.
Finishes with modelling film Can be removed quickly and easily.
When using a heat-gun do not exceed temperatures above 60°C/140°F.
The clay-model can be casted with gypsum or silicone. As releasing agent shellac can be used.
The clay can be lacquered withClayPeel.
Soiled surfaces can be cleaned with solvent cleaner.
使用说明：
作为一种具有永久延展性的化合物，Marsclay培养基保持柔韧，可以反复使用。
当加热到55°C/131°F- 60°C/140°F时，粘土变得柔软而柔韧。
加热时间约为5小时（取决于烤箱的类型和负载）。
在高达 25°C/77°F 的室温下，模型保持其轮廓和边缘。
通过炎热的条件或直接的太阳辐射，表面会发生软化。
木材、聚苯乙烯和硬质泡沫可用作基材。
基材和温暖的造型粘土无需粘合剂即可粘合。
严重数量应分层应用。
通过应用更大的质量，建议预热基层以获得最佳粘合。
一旦顶面冷却下来，模型就可以用手工或铣床成型。
可以对成品模型进行简单且无尘的修改。
由于特殊的粘合质量，可以使用少量材料。
如果发生严重变化，建议对之前的表面进行粗化处理。
带造型膜的饰面 可以快速轻松地去除。
使用热风枪时，温度不要超过60°C/140°F。
粘土模型可以用石膏或硅树脂浇铸。可以使用紫胶作为脱模剂。
粘土可以用ClayPeel上漆。
脏污的表面可以用溶剂清洁剂清洗。
STAEDTLER粘土其他常见型号：
STAEDTLER 8432M
STAEDTLER 8432MC
STAEDTLER 8432L
STAEDTLER 8432LC
STAEDTLER sludge NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于STAEDTLER粘土8432M的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for STAEDTLER products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.
STAEDTLER粘土8432M产品参数
