IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 电气控制 >> 遥控装置 >> 远程控制装置 >> TELE SUPPLY无线电发射器

TELE SUPPLY无线电发射器

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:JTM-30C 100W PEP
TELE SUPPLY发射器JTM-30C 100W PEP
预估货期:
关  键  词:TELE SUPPLY发射器JTM-30C 100W PEPJTM-50C 500W PEP
相似产品:
是否有问题?联系我们工作人员
  邮件联系

TELE SUPPLY发射器JTM-30C技术参数

Versions of NDB equipment (all-in-one)

Single -Dual versions

Antenna Tuning inside Transmitter   Cabinet

Manual (Autotune Option)

Modules inside Transmitter Cabinet

PCU Board, Exciter, HPA and ATU

External units

Power Supply and Remote Control(s)

Comply to

ICAO and other applicable requirements

Transmitter operates from

24VDC+30%/-10%

Protection against

Wrong polarity, overvoltage and   overheating

AC Power Supply operation from

AC mains 115/230 VAC +/-10% and 24V

Ambient operating temperature

-35°C to+55°C

Humidity Transmitter & Power Supply

up to 95% at + 40 ℃

IP Protection (transmitter)

IP66

Frequency range (by synthesizer)

190 to 2000 kHz in step of 1Hz

Frequency stability

2,5 p.p.m.

RF Power Output (adjustable)

Up to 100 W PEP(into 10 ohm 250 pF)

Harmonic and spurious attenuation

More than 60 dB below carrier

Noise and hum attenuation

More than 40 dB below carrier

Power consumption (full power)

approx.200w

Antenna impedance (resistance)

R= 2 to 25 ohms

Antenna capacity

C = 150 to 500 pF

Types of emission

AIA, A2A, N0N/A2A, A3E

Modulation tone

400/1020 Hz.Any frequency 300-1350 Hz

Audio input for AM voice broadcasting

0 dBm 600 ohms with push-to-talk   capability

Modulation AM (adjustable)

0 to 95%, max 5% distortion

Minimum Shift Keying (MSK

Option (RS-232 and serial input)

Morse Identification code and speed

Any combination of code (512 bits), 3   -20 wpm

Morse sequence arrangements

Continuous, One time, Once every, Until

Timing/Interval for operation

1 minute to 100 minutes

Monitoring and alarms

RF output & keying seq., DC failure,   TXA/TXB

Remote Control Unit (via wires)

ON/OFF/Remote and LEDS for monitoring

Remote Control & Monitoring (from   PC)

Total control and monitoring via RS-485
  Interface, at any distance (up to 2-300m)

Transmitter Dimensions & Weight

Height: 600 mm + insulator
  Width: 400 mm+ heat sink 40mm
  Depth: 320 mm
  Weight: 33,8 kg (Dual), 31,6 kg (Single)

Transmitter Cable Glands

PG16

Power Supply Dimensions & Weight

Height: 315 mm
  Width: 195 mm
  Depth: 95 mm
  Weight: 5,6 kg

Power Supply Cable Glands

PG21

Remote Control Dimensions & Weight
  (for installation in 19" Panels)

Height: 88 mm
  Width: 250 mm
  Depth: 40 mm
  Weight: 0,3 kg


爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

TELE SUPPLY发射器JTM-30C介绍

JTM-30C 型 NDB 发射机是一款非定向无线电信标 (NDB) 发射机,设计用于石油钻井平台和船舶上的船载使用,以及其他应用。

 

JTM-30C 提供两种不同的射频功率输出版本(100W PEP 或 200W PEP),可配置为单 NDB 发射机,配备一条完整的发射链路,或作为双 NDB(或冗余)发射机,具有两条完整的发射链,具备故障检测/报告和自动切换功能,共用天线调谐。

 

发射机阻抗匹配天线阻抗需要手动调谐。自动调谐单元为选配功能。该设备基于全新的NDB发射机理念,采用数字激励器。发射机具有以下主要特性。

 

JTM-30C 确实是一款一体化单元,包含天线调谐电路、激励器(用于产生输出信号)、射频功率放大器以及控制和监控电路。交流电源和直流电源也可安装在 IP66防护等级的防风雨加固型发射机机柜内。

 

柜体内部安装有加热元件,用于在低温下降低湿度。

 

NDB Transmitter Type JTM-30C is a Non-Directional Radio Beacon (NDB) Transmitter designed for onboard use on oilrigs and ships, as well as for other applications.

 

The JTM-30C is available in two different RF Power output versions (100W PEP or 200W PEP) as Single NDB Transmitter configuration with one complete transmit chain, or as

Dual NDB (or Redundant) Transmitter with two complete transmit chains with fault detection/reporting and automatic changeover, common Antenna Tune.

 

Transmitter tuning to match the antenna impedance is a manual procedure. Auto Tune Unit is offered as an option. The equipment is built upon a totally new concept for NDB transmitters utilizing digital Exciters. The transmitters have the following main features

 

JTM-30C is indeed an ALL-IN-ONE unit consisting Antenna Tuning Circuits, Exciter(s) (generating the output signal), RF Power Amplifier(s) and Control & Monitoring circuits. The AC Mains & DC Power Supply may also be installed inside the IP66 weatherproofed and ruggedized Transmitter cabinet.

 

A heater element is installed inside the cabinet to reduce humidity at low temperature.

 

TELE SUPPLY发射器其他常用型号:

TELE SUPPLY JTM-30C 100W PEP

TELE SUPPLY JTM-30C 200W PEP

TELE SUPPLY JTM-50C 500W PEP

TELE SUPPLY JTM-50C 1000W PEP

 

TELE SUPPLY transmitter NEW + ORIGINAL+ ONE YEAR WARRANTY

 

爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

 

如果有任何关于TELE SUPPLY发射器JTM-30C 100W PEP的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。

 

If you have any question for TELE SUPPLY products, please feel free to dial 0086-21-3100 6702/ send request email to [email protected] / browse our website: www.ize-industries.com.


TELE SUPPLY发射器JTM-30C 100W PEP技术参数及介绍

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。 沪公网安备31011002006738号