FORNEY 火焰探测放大器IDD9000规格描述
Specifications | ||
Panel Mount: | Rack Mount: | |
Dimensions: | 10 1/2” x 7 7/8” x 3 7/8” (26.6 cm x 20 cm x 9.8 cm) | 6.5 x 14 x 1.75 inches (155.6 x 355.6 x 44.5 mm) |
Weight: | 5 lbs. 3 oz. | 1 lb 7 oz. |
Temperature: | 32° to 140°F (0° to 60°C) | |
Humidity: | 5% to 95% relative humidity, non-condensing | |
Power Requirements: | 120/240 VAC, 50/60 Hz @ 12 VA | |
Output Relay Ratings (SPDT): | 3 A at 125 VAC, 250 VAC & 30 VDC | |
Flame Strength: | 4-20 mA or 0-10 VDC (sourcing) | |
Flame Failure Response Time (FFRT): | 2.0, 3.0 or 3.8 seconds | |
Flame Pickup Time: | less than 2 seconds | |
Nonvolatile RAM: | 8 complete operating profiles | |
Approvals: | Factory Mutual (FM) | |
FORNEY火焰探测放大器IDD9000产品介绍
在燃烧器启动之前，NFPA 85要求证明“未检测到火焰”，多燃烧器锅炉中可靠的火焰检测和燃烧器与燃烧器的区分更具挑战性。这种NFPA要求以及难以区分的挑战，例如低NOx燃烧器和反向燃烧锅炉，要求火焰检测系统提供更强大的信号分析和调节能力。IDD 9000采用基于数字信号处理器（DSP）的火焰信号处理方法，为NFPA兼容系统提供必要的高级调谐功能。
IDD 9000火焰放大器设计用于轻松升级现有的Forney火焰放大器，大多数安装只需更换火焰放大器并重新连接现有电线，以改善火焰探测和识别。IDD 9000可提供面板或机架安装; 单通道或双通道配置。双通道配置使用两个完全独立的通道同时支持两个火焰探测器。
兼容性
放大器升级 - IDD 9000可以在任何具有完全兼容性的应用中取代大多数Forney火焰放大器，面板或机架安装。
火焰探测器 - 适用于所有版本的Forney IDD和UV-4探测器。
模拟输出 - 火焰强度输出可提供0-10 VDC或4-20 mA。
Reliable flame detection and burner-to-burner discrimination in multi-burner boilers is significantly more challenging with the NFPA 85 requirement to prove “flame not detected” prior to burner start-up. This NFPA requirement along with difficult discrimination challenges, such as low NOx burners and opposed fired boilers, are demanding more powerful signal analysis and tuning capability from flame detection systems. The IDD 9000 employs a Digital Signal Processor (DSP) based flame signal processing method to offer advanced tuning capabilities necessary for a NFPA compliant system.
The IDD 9000 Flame Amplifier is designed for easy upgrade of existing Forney flame amplifiers with most installations simply requiring a flame amplifier replacement and reconnection of existing wires to improve flame detection and discrimination. The IDD 9000 is available in panel or rack mount; single or dual channel configurations. The dual channel configurations use two fully independent channels to support two flame detectors simultaneously.
Compatibility
Amplifier Upgrades – The IDD 9000 can replace most Forney flame amplifiers, panel or rack mount, in any application with complete compatibility.
Flame Detector – Works with all versions of Forney’s IDD and UV-4 detectors.
Analog Output – Flame intensity output is available in either 0-10 VDC or 4-20 mA.
FORNEY 火焰探测放大器IDD9000
爱泽工业(IZE INDUSTRIES)特价经销、常用备件FORNEY 火焰探测放大器I部分型号：
FORNEY IDD 9000
FORNEY Flame Detector Amplifier NEW + ORIGINAL+ ONE YEAR WARRANTY
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何关于FORNEY火焰探测放大器IDD9000的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。
If you have any question for FORNEY products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.
FORNEY火焰探测放大器IDD9000产品参数
