IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 工业过程控制及仪表 >> 压力仪表丨压力变送 >> 智能差压变送器 >> FOXBORO差压变送器IDP10 I/A系列

FOXBORO差压变送器IDP10 I/A系列

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:IDP10-TS3C01F-M1L1T
FOXBORO变送器IDP10系列 IDP10-TS3C01F-M1L1T
预估货期:
关  键  词:FOXBORO变送器IDP10-TS3C01F-M1L1T
相似产品:
是否有问题?联系我们工作人员
  邮件联系

FOXBORO变送器IDP10系列产品参数

Specification


Communication Protocol:

4 to 20 mA dc with HART communication

Remote Communications:

Must not interfere with output

Accuracy:

Digital Output, Linear: ±0.050% of calibrated span 4 to 20 mA Output, Linear: ±0.060% of calibrated span

Damping:

Settable for a range of none to 32 seconds

RFI Protection:

0.1% error between 27 and 1000 MHz at 30 V/m field intensity

Span Limits:

0.5 and 30 inH2O, 3.5 and 200 inH2O, 1 and 30 psi, 10 and 300 psi, 100 and 3000 psi, as specified; or SI and metric equivalents.

Proof Pressure:

14,500 psi for standard transmitters

Mounting:

On process piping, on a manifold, or optional mounting bracket

Input Connection:

With process connectors to accept 1/4 NPT, 1/2 NPT, Rc 1/4, Rc 1/2, or 1/2 Schedule 80 welding neck; or 1/2 NPT PVDF inserts installed in 316 ss process covers; or prepared for a direct connect seal; or prepared for a single remote capillary connected seal, or two remote capillary connected seals.

Electronics Housing:

316 ss, or aluminum housing with epoxy finish

Modular Electronics:

Enclosed in a NEMA 4X (IEC IP66) housing sealed with O-rings for protection against moisture or other contaminants. Optional Integral LCD indicator with onboard configuration pushbuttons.

Process Cover:

Traditional Structures
Steel, 316 ss, Monel, Nickel alloy (a) or PVDF insert
Low Profile Structures:
316 ss

Sensor Materials: T

Traditional Structure:
316L ss, Nickel alloy(a), Co-Ni-Cr, Monel, Tantalum, or
Gold-Plated 316L ss
Low Profile Structures:
316L ss or Nickel alloy(a)

Approvals and Certifications:

Must be suitable for Division 1 hazardous locations, and conform to all applicable European Union Directives. Also versions available to meet Agency flameproof and zone requirements.

Approximate Mass: (with Process Connectors)

4.2 kg (9.2 lb), with Traditional Structures;
Add 0.1 kg (0.2 lb) with Low Profile Structure LP1;
Add 0.8 kg (1.8 lb) with Low Profile Structure LP2;
Add 1.1 kg (2.4 lb) with 316 ss housing;
Add 0.2 kg (0.4 lb) with optional LCD indicator.

Model Code:

I/A Series IDP10 Intelligent d/p Cell Transmitter with HART Communication Protocol, with or without pressure seals, or equivalent.

爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

FOXBORO变送器IDP10系列产品介绍

Foxboro品牌I / A系列IDP10型是智能的两线制d / p电池变送器,可提供精确,可靠的压差测量,并传输4至20 mA的输出信号以及叠加的HART数字信号以进行远程配置和监控。

 

The Foxboro brand I/A Series Model IDP10 is an Intelligent, two-wire d/p Cell transmitter that provides precise, reliable, measurement of differential pressure, and transmits a 4 to 20 mA output signal with a superimposed HART digital signal for remote configuration and monitoring.

 

FOXBORO差压变送器IDP10系列特征

硅应变计传感器已成功地在数千个装置中进行了现场试验。

简单、优雅的传感器包装,很少有部件达到极高的可靠性。

变送器可用于传统或低剖面结构。

铝外壳具有耐用、耐腐蚀的环氧树脂饰面;也可提供316不锈钢外壳;均符合NEMA 4X和IP66等级。

可作为密封测量系统提供,具有多种配置的直接连接或毛细管连接密封。

作为选项提供的SIL2认证变送器。

可选的安装支架组允许对变送器进行管道、表面或歧管安装。

带哈特的远程配置

单回路或多点模式下的通信协议;或通过可选的液晶显示器进行本地通信。

FM、CSA和ATEX本质安全装置可使用多标记。用户确定并在铭牌上永久标记要申请的认证。

用户输入的截止点为最大流量的0%至20%。

经CSA认证的双重密封,符合ANSI/ISA 12.27.01-2003要求。

行业标准316L ss、Co-Ni-Cr、镍合金(1)、蒙乃尔合金或钽传感器材料,取决于变送器结构。

 

Silicon strain gauge sensors successfully fieldproven in many thousands of installations.

Simple, elegant sensor packaging, with very few parts achieves exceptionally high reliability.

Transmitter available with traditional or low profile structures (see photos above).

Aluminum housing has durable, corrosionresistant epoxy finish; 316 ss housing also available; both meet NEMA 4X and IP66 ratings.

Can be provided as a sealed measurement system with numerous configurations of direct connect or capillary connected seals available.

SIL2-Certified Transmitter offered as an option.

Optional mounting bracket sets allow pipe,surface, or manifold mounting of transmitter.

Remote configuration with HART

communication protocol in a single loop or multidrop mode; or locally via optional LCD indicator.

Multi-marking is available for FM, CSA, and ATEX intrinsically safe installations. The user determines and permanently marks on the data plate the certification to be applied.

User-entered cutoff point from 0 to 20% of maximum flow.

Dual Seal certified by CSA to meet ANSI/ISA 12.27.01-2003 requirements.

Industry standard 316L ss, Co-Ni-Cr, Nickel alloy(1), Monel, or Tantalum sensor materials,depending on transmitter structure.

 

FOXBORO变送器IDP10系列其他常见型号:

FOXBORO IDP10-T22B01C-L1K1

FOXBORO IDP10-T22B01C-M1L1

FOXBORO IDP10-A22C01F-M1

FOXBORO IDP10-A20B21F-M1

FOXBORO IDP10-T22A21E-M1V

FOXBORO IDP10-TLLC05E-L1B3T

FOXBORO IDP10-D22B21F-C1

FOXBORO IDP10-TS3C01F-M1L1T

 

FOXBORO differential pressure transmitter NEW + ORIGINAL+ ONE YEAR WARRANTY

 

爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

 

如果有任何关于FOXBORO变送器IDP10-TS3C01F-M1L1T的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。

 

If you have any question for FOXBORO products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website:www.ize-industries.com.


FOXBORO变送器IDP10-TS3C01F-M1L1T产品参数

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。