PNEUMAX电磁阀900.18系列

操作特性

流体：过滤并润滑的空气

工作压力（bar）：3 ... 10

温度（°C）：-5 ... +70

在6 bar压力下，压差为1时的流量（升/分钟）：130

孔径尺寸（mm）：2.5

Operational characteristics

Fluid:Filtered and lubricated air

Working pressure (bar):3 ... 10

Temperature °C:-5 ... +70

Flow rate at 6 bar with Δp=1 (Nl/min):130

Orifice size (mm):2.5

PNEUMAX电磁阀900系列介绍

900系列由以下组件组成：

压力开关：将气压信号转换为电信号的装置。

脉冲发生器：将持续的气压信号转换为可调节的脉冲，持续时间范围为0到10秒。

气动计时器（常闭或常开）：在可调节的时间内切断或释放气压信号。

双手安全阀：确保双手气动控制的安全使用（例如两个3/2常闭按钮在一定距离内），避免按键或阀门故障的误信号。

翻转阀（Flip Flop）：5/2通道单信号驱动的阀门，每个脉冲切换出口，从2路切换到4路，反之亦然。

为了确保正常工作，入口压力应与或低于先导压力。

振荡器阀：5/2 G 1/8寸，带有两个逻辑功能“NOT”，安装在电路板上，当连接的气缸排气室压力达到“NOT”阈值时切换。

信号放大器：3/2 G 1/8寸常闭阀门，受微弱信号驱动，但压力高于0.05 bar。

渐进启动阀：安装在阀门或电磁阀与气缸之间的一种装置，可逐步充满气缸腔体，提供低推力的气缸运动。渐进启动阀由流量控制阀和一个带有6毫米名义孔的2/2常闭阀组成，当气缸内压力达到入口压力的50%时，阀门完全开通。

高低压设备：位于阀门与气缸之间的气动回路中，允许气缸在两种不同压力下工作。例如：在锁定动作的情况下，可以在低压力下接近所需位置，然后通过电信号将压力提升到最大值。这些设备实际上由一个无泄放的导控压力调节器组成。

The 900 series consist of the following components:

Pressure switch, which transforms a pneumatic signal into an electric one.

impulse generator, which transforms a permanent pneumatic signal into an adjustable impulse from 0 to 10 seconds.

Pneumatic timer (n.C. or n.O.), which cuts or releases a pneumatic signal within an adjustable time.

Two hands safety valve, which allows a safety use of two hands pneumatic controls (for example two push-button 3/2 N.C. to a certain distance) excluding false signals in case of push-button or valve malfunction.

Flip Flop: 5/2 ways valve, single signal actuated, commutes the outlet from 2 to 4 and vice versa at each puls.

For a correct functioning it’s important that inlet pressure be the same or lower than pilot pressure.

Oscillator valve, 5/2 G 1/8″ with two logic functions “NOT” mounted on board, switches when the pressure in the connected cylinder exhaust chamber is reaching the threshold of “NOT”.

Signal amplifier, 3/2 G 1/8″ N.C. valve actuated by weak signals but higher than 0.05 bar.

Progressive start-up valve, which is a device that is fitted in between valve or solenoid valve and cylinder allows a gradual filling of the chamber providing a low power cylinder movement. The progressive start-up valve is made of a flow control valve and a 2/2 N.C. valve with 6 mm nominal orifice. the valve is totally open when the pressure in the cylinder reaches 50% of inlet pressure.

High-low pressure devices, located in the pneumatic circuit between valve and cylinder, allow the function of the cylinder with two different pressures. Example: in case of a locking action, it is possible to approach the required position at a low pressure, then increase to its maximum value in the circuit with the use of an electric signal. they are practically made of a piloted pressure regulator without relieving.

PNEUMAX电磁阀900系列其他常用型号：

PNEUMAX 900.18.1

PNEUMAX 900.18.0

PNEUMAX 900.18.2N

PNEUMAX 900.18.3

PNEUMAX 900.18.3.6

PNEUMAX Solenoid Valve NEW + ORIGINAL+ ONE YEAR WARRANTY

爱泽工业成立于2010年，定位于向制造工业提供高端制造技术和设备。代理经营世界优质的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。

如果有任何关于PNEUMAX电磁阀900.18.3的疑问，请随时与我们沟通（021-31006702）。我们将尽全力解决您的问题。

If you have any question for PNEUMAX products, please feel free to dial 0086-21-3100 6702/ send request email to [email protected] / browse our website:www.ize-industries.com.

PNEUMAX电磁阀900系列900.18.3技术参数及尺寸

• PNEUMAX电磁阀900.18.3