IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 检测-测量-传感器 >> 温度丨湿度 >> 温度控制单元 >> TECSYSTEM温度控制器NT538系列

TECSYSTEM温度控制器NT538系列

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:NT538ETH
TECSYSTEM温控器NT538ETH
预估货期:
关  键  词:TECSYSTEM温控器NT538ETHNT935ETHNT935WSNT935AD
相似产品:
是否有问题?联系我们工作人员
  邮件联系

TECSYSTEM温控器NT538ETH技术参数

Technical   Specifications


Power Supply

Rated values   85-260 Vac-dc
  Vdc with reversible polarities

Inputs

8 inputs RTD   PT100 3 wires (max section 1.5 mm²)
  Removable rear terminals
  Input channels protected against electromagnetic interference
  Sensor length cable compensation up to 500 m (1 mm²)

Outputs

2 alarm relays   (ALARM-TRIP)
  2 alarm relays for fan control (FAN1 and FAN2)
  1 alarm relay for sensor fault or working anomaly (FAULT)
  Output contacts capacity: 10A-250 Vac-res COS ∅=1
  Ethernet output 10Base T/ 100Base-TX Modbus TCP slave

Tests and   performances

Assembling in   accordance with CE rules
  Protection against electromagnetic noises CEI-EN61000-4-4
  Dielectric strength: 1500 Vac for 1 minute from relays to sensors, relays to   power supply, power supply to sensors
  Accuracy: ± 1% full scale value ± 1 digit
  Ambient operating temperature: from -20°C to +60°C
  Humidity: 90% non-condensing
  Self-extinguishing housing NORYL UL 94V0
  Polycarbonate frontal film IP65
  Burden: 7.5VA
  Digital linearity of sensor signal
  Self-diagnostic circuit
  Option: tropicalization

Displaying and   data management

2 displays 13 mm   with 3 digits for displaying temperatures,messages and channels
  3 leds to display the state of the alarms of the selected channel
  2 leds to display the state of FAN1 and FAN2
  Temperature monitoring from 0°C to 240°C
  1 ALARM thresholds for each channels
  1 TRIP thresholds for each channels
  2 ON-OFF thresholds for FAN1 and FAN2 in common for all enabled channels
  Sensors diagnostic (Fcc-Foc-Fcd)
  Data storage diagnostic (Ech)
  Access to programming through front keyboard
  Automatic exit from relay programming, display and test after 1 minute’s   inactivity
  Incorrect programming warning
  Possibility of setting automatic channels scanning,hottest channel, manual   scanning
  Maximum reached temperatures and alarm storage
  Frontal alarm reset push button
  Voting function
  Fail Safe function

Dimensions

100 x 100 mm DIN   IEC 61554 (ex. DIN 43700) depth 131 mm (terminals included)
  Panel cut-out 92 x 92 mm


爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

TECSYSTEM温控器NT538ETH介绍

NT538 ETH是一款创新的电子设备微控制器,专为电机和中压干式/浇注树脂变压器的温度监测而设计,并集成以太网端口。

 

它具备监测和控制温度所需的所有必要功能,与现有NT538产品线一样,在2016年版本中,其硬件和软件均进行了功能增强。

 

通过ModBus TCP/IP协议与网络通信,使用户能够舒适地在办公桌前查看和编程所有设备功能!

 

NT538 ETH保留了传统的8个Pt100输入(绕组+环境)和5个继电器(ALARM、TRIP、FAN1、FAN2 和 FAULT),并新增了功能,改进了前面板的显示。此外,得益于2016年新版本的多功能性,它还支持其他传感器输入。

 

The NT538 ETH is an innovative electronic device microcontroller based for the temperature monitoring of electric motors and MV dry type/cast resin transformers, with integrated ETHernet port.

 

Equipped with all the necessary functions needed to monitor and control the temperature, as well as the existing product line NT538, it is presented, in this edition 2016, with a more functional version of both hardware and software.


Communication with the network is via ModBus TCP/IP protocol, that allows the user to display and to program all the unit functions from the comfort of the desk!

 

The NT538 ETH maintains the traditional 8 Pt100 inputs (windings + environment) and 5 relays ALARM, TRIP, FAN1, FAN2 and FAULT, as well as new functions and renewed display on the front and thanks to the versatility of the new edition 2016, other sensor inputs are available.

 

TECSYSTEM温控器其他常用型号:

TECSYSTEM NT538ETH

TECSYSTEM NT935ETH

TECSYSTEM NT935WS

TECSYSTEM NT935AD

TECSYSTEM NT539

TECSYSTEM T119

TECSYSTEM T30

TECSYSTEM NT511 AD

TECSYSTEM T154

TECSYSTEM T1048

TECSYSTEM NTF999

 

TECSYSTEM temperature controller NEW + ORIGINAL+ ONE YEAR WARRANTY

 

爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

 

如果有任何关于TECSYSTEM温控器NT538ETH的疑问,请随时与我们沟通(021-31006702)。我们将尽全力解决您的问题。

 

If you have any question for TECSYSTEM products, please feel free to dial 0086-21-3100 6702/ send request email to [email protected] / browse our website: www.ize-industries.com.


TECSYSTEM温控器NT538ETH技术参数及介绍

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。 沪公网安备31011002006738号