PLC platform

1756 ControlLogix

Analog Sensor Range

Can be programmed to   work with sensors that output +/- 10V, 0 to 10V, 0 to 5V, or 0 to 20mA signals

Maximum resolution

14 bit (16384 counts)   over the –10.25 to 10.25V span

13 bit (8192 counts)   over the 0 to 10.25V span

13 bit (8192 counts)   over the 0 to 20mA span

12 bit (4096 counts)   over the 0 to 5.125V span

Acquisition time

50us minimum for all   channels

Each channel has an   individually programmable sample rate in 50us increments.

Maximum number of   Samples per acquisition time

1 channel = 128

2 channels = 64 per   channel

3 channels =42 per   channel

4 channels =32 per channel

Number of I/O

- 4 Analog Inputs

- 4 Digital Inputs   (can optionally be used to control when the sampling operation is to occur.)

- 4 Digital Outputs   (can be used to indicate if the measured analog value is inside or outside of   a programmed range.)

Number of inspection   points

32 points per channel   maximum

Backplane DC supply   requirements

610mA @5Vdc

Cable requirements

Sensor dependent

Required hardware

Not included with the   5274A module

1756-TBCH (36 position   cage clamp) or

1756-TBS6H (36   position spring clamp)

Order from your   Rockwell Automation supplier

Optional Hardware

na