B+S TRELLEBORG导向带Orkot Slydring系列介绍

B+S TRELLEBORG导向带Orkot Slydring系列介绍

Orkot Slydring由织物增强的复合材料制成，并使用机织织物和热固性树脂，并加入均匀分散的固体润滑剂。

建议将Orkot用于承受高负荷的液压缸，例如移动式液压机或压力机。 高抗压强度，良好的滑动性能和出色的耐磨性确保了较长的使用寿命。

Orkot Slydring are manufactured from fabric-reinforced composite material using a woven fabric and thermoset resins, incorporating evenly dispersed solid lubricants.

Orkot is recommended for use in hydraulic cylinders exposed to high loads, such as in mobile hydraulics or presses. High compressive strength, good sliding behavior and exceptional wear resistance ensure a long service life.

Orkot Slydring由管状或带状材料制成，并切成合适的尺寸，包括具有必要宽度的切角间隙。 对于大于300 mm的大直径，可以使用Orkot C320，C380或C480带材切割环，这为非标准直径或数量有限时提供了经济的解决方案。

Orkot Slydring is manufactured from either tubular or strip material cut to the right size, including an angle cut gap with the necessary width. For large diameters, > 300 mm, rings can be cut from Orkot C320, C380 or C480 strip material.This offers economical solutions for non-standard diameters or when quantities are limited.

B+S TRELLEBORG导向带Orkot Slydring系列材质介绍

Orkot C380

Orkot C380是一种绿松石色的多功能Slydring材料，在各种液压介质（例如矿物油或合成油以及水基流体）中具有增强的滑动性能。它具有良好的减振效果，使用寿命长，摩擦小，适用于所有常用的相对表面。C380是大多数应用的首选。

Orkot C380 is a turquoise colored, versatile Slydring material with enhanced sliding properties in various hydraulic media,such as mineral or synthetic oils, as well as water based fluids. It is good at damping vibrations, it offers long service life, low friction and is suitable for all commonly used counter surfaces. C380 is the first choice for most applications.

Orkot C480

Orkot C480是已建立的C380的进化发展。固体润滑剂的精细分散混合物可改善静态和动态摩擦系数，从而减少或消除粘滑的影响。与液压油的强亲和力提高了其在少量润滑时的运行潜力。

Orkot C480 is an evolutionary development of the established C380. A finely dispersed mix of solid lubricants improve the static and dynamic coefficient of friction therefore reducing or removing the effect of stick-slip. A strong affinity with hydraulic fluid improves its potential to operate when marginally lubricated.

Orkot C320

Orkot C320一直是液压应用的历史选择。机织织物增强的热固性复合材料具有润滑剂添加剂，具有极高的耐磨性，良好的干运转性能并能抑制振动。

Orkot C320 has been the historic choice for hydraulic applications. The woven fabric reinforced thermoset composite with lubricant additives has a very high resistance to wear,good dry-running properties and dampens vibrations.

Orkot C932

Orkot C932是由浸有酚醛树脂的精细编织棉织物制成的复合材料。材料的刚度大于其他Orkot Slydring材料。不建议在水性液体中使用C932。

Orkot C932 is a composite made from a fine weave cotton fabric impregnated with a phenolic resin. The material stiffness is greater than other Orkot Slydring materials. Use of C932 in water-based fluids is not recommended.

B+S TRELLEBORG导向带Orkot Slydring系列选型