IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 材料-化工-润滑及相关设备 >> 工业流体丨化工 >> 涂层丨保护剂丨防锈剂丨除锈剂

涂料丨保护剂丨防锈剂

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:ECCOSHIELD® ES
LAIRD涂料ECCOSHIELD® ES
预估货期:
关  键  词:LAIRD涂料ECCOSHIELD® ES
相似产品:
是否有问题?联系我们工作人员
  邮件联系
爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

美国LAIRD涂料ECCOSHIELD® ES

ECCOSHIELD® ES is a highly conductive surface coating that is a fine silver based lacquer and is sufficiently fluid enough that it will readily flow into cracks. However, ECCOSHIELD® ES will not fill gross voids at joints or seams; use a caulking compound such as ECCOSHIELD® VY product.

ECCOSHIELD® ES was specifically formulated for RF shielding applications and is often used to improve the RF integrity of metal housings or screen rooms. By applying ECCOSHIELD® ES to joints, seams and contacting surfaces, it is possible to convert a reasonably good metal structure to one of greater than 100 dB insertion loss from 15 kHz to 10 GHz. Metal to metal contact can be improved significantly as the coating fills slight irregularities and makes such intimate contact with exposed metal that even corroded joints can be made acceptable RF seals. When applied to a non-conductor, surface resistivity is substantially less than 1 ohm/square. Successive coats decrease surface resistivity even further. ECCOSHIELD® ES adheres well to metals, plastics,ceramics,wood,andconcrete


CONDUCTIVE SURFACE COATING

Eccoshield ES is a highly conductive surface coating that is a fine silver based lacquer and issufficiently fluid enough to readily flow into cracks. Eccoshield ES will not fill gross voids atjoints or seams; use a caulking compound such as Eccoshield VY. Metal to metal contact isimproved significantly by applying Eccoshield ES. The coating fills slight irregularities andmakes such intimate contact with exposed metal that even corroded joints can be madeacceptable RF seals. Eccoshield ES adheres well to metals, plastics, ceramics, wood andconcrete. When applied to a non-conductor, surface resistivity is substantially less than1 ohm/square. Successive coats decrease surface resistivity even further. 


FEATURES AND BENEFITS

• Highly conductive coating

• Fluid consistency allows material to readilyflow into cracks to improve shielding

Effectiveness


MARKETS

• Commercial Telecom

• Test and Measurement


image.png


APPLICATIONS

• Eccoshield ES was specifically formulated for RF shielding applications and is often used toimprove the RF integrity of metal housings or screen rooms.

• By applying Eccoshield ES to joints, seams, and contacting surfaces, it is possible toconvert a reasonably good metal structure to one of greater than 100 dB insertion lossfrom 15 kHz to 10 GHz


AVAILABILITY

• Please contact your local supplier as there might be regional differences with regard topackaging.

• Eccoshield ES is a hazardous material (flammable).


INSTRUCTIONS FOR USE

• Eccoshield ES can be brushed or sprayed, with adequate ventilation recommended.

When sprayed using standard spraying equipment, it can drive the silver particles intocrevices and other hard to reach places.

• If a diluent is needed, use methyl ethyl ketone MEK.

• Remove grease, oil, wax and other debris from the surface to be coated with a suitablesolvent or cleaning agent. If electrical contact is to be established with a metal base, themetal surface must be free from non-conductive films.

• Shake the contents of the container in which the Eccoshield ES is received in until it isuniform in consistency, then pour out the desired amount.

• Apply the Eccoshield ES to the prepared surface with either a brush or spraying

application

• The coating will normally air dry in one hour to a surface resistivity of less than 1ohm/square. Apply additional coats if needed.

• The handling of this product should present no problems if ordinary care is exercised toavoid breathing vapours, the skin is protected against contamination, swallowing isavoided and the eyes are protected.

• Do not use near an open flame as it is highly flammable. The flash point is 4 °C. Keep awayfrom direct sunlight, ovens, radiators, hot water, and other heat sources; hightemperatures may cause bursting of the container.


laird eccoshieldes izeindustries 爱泽工业.jpg


爱泽工业(IZE INDUSTRIES)特价经销、常用备件型号:

LAIRD导电填缝料ECCOSHIELD® VY

LAIRD导电片ECCOSHIELD® LSV

LAIRD导电胶ECCOSHIELD® RVS

LAIRD涂料ECCOSHIELD® ES


爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的首选渠道。


如果有任何关于美国LAIRD涂料ECCOSHIELD® ES的疑问,请随时与我们联系,(021-3100 6702),我们将尽全力解决您的问题。

有关美国LAIRD涂料ECCOSHIELD® ES更详细的信息或者购买美国LAIRD 相关产品,请联系爱泽工业。

If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。