IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 工业过程控制及仪表 >> 控制器 >> FOXBORO气动控制器43AP系列及配件

FOXBORO气动控制器43AP系列及配件

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:43AP-FA42C-PC-00-IAS-AG
FOXBORO气动控制器43AP-FA42C-PC-00-IAS-AG
预估货期:
关  键  词:FOXBORO气动控制器43AP-FA42C-PC-00-IAS-AG43AP-PA42C/T
相似产品:
是否有问题?联系我们工作人员
  邮件联系

FOXBORO气动控制器43AP系列规格描述

PERFORMANCE SPECIFICATIONS

Accuracy

INPUT TO POINTER
±0.5% of span for qualified elements.
INPUT TO OUTPUT
Depends on measuring element used.

Repeatability

0.2% of span.

Deadband

0.1% of span.

Ambient Temperature Effect

Maximum control point shift at midspan per 55°C (100°F) change within normal operating conditions is 1% of input span.

Supply Pressure Effect

Maximum control point shift at midspan per 7 kPa (1 psi) change within normal operating conditions is 0.2% of input span.

FUNCTIONAL SPECIFICATIONS

Elements

Refer to Measuring Element Specifications section for types, materials, and ranges.

Controller Action

Output signal either increases or decreases with
increasing measurement, as specified; action is
reversible in the field.

Output Signal

20 to 100 kPa, 3 to 15 psi, or 0.2 to 1.0 bar or
kg/cm2, as specified.

Air Consumption (Under normal operation)

0.5 m3/h (0.3 cfm) at standard conditions.

Output Gauge

0 to 200 kPa, 0 to 30 psi, or 0 to 2 bar or kg/cm2, as specified.

Set Point Adjustment

By means of a knob mounted inside the case.

Pointers

Set point and measurement pointers are fluorescent red.

Scale

Black markings on white background; sector-shaped with nominal effective length of 150 mm (6 in). (Refer to Chart and Dial Catalog 600 for  vailable ranges.)

Connections (Located in Bottom of Case.)

PRESSURE AND VACUUM
• For upper range-values up to 14 MPa (2000 psi,
or 140 bar or kg/cm2): Connections tapped for
R1/4 or 1/4 NPT, as specified.
• For upper range-values from 14 MPa (2000 psi,
or 140 bar or kg/cm[sup/2]) up to 70 MPa
(10 000 psi, or 700 bar or kg/cm2): Connections
threaded for R1/2 or 1/2 NPT, as specified.
• For upper range-values above 70 MPa (10 000 psi, or 700 bar or kg/cm2): 9/16-18 Aminco® fitting used.
PNEUMATIC
Supply and output connections tapped for 1/4 NPT.

Mounting

PANEL
Flush in a panel up to 16 mm (0.6 in) thick.
SURFACE
Suitable for all controllers having internallymounted elements. Note that this mounting is not available with heavy duty helical elements. (These elements extend through the back of the case.)
PIPE
A kit of parts to fit a DN 50 or 2 in vertical pipe.
YOKE
Kit of parts to fit a vertical DN 50 or 2 in pipe stub. This mounting scheme is designed specifically for controllers having rear-mounted differential pressure elements.

PHYSICAL SPECIFICATIONS

Enclosure

The case is a glass fiber reinforced polyester
molding, compounded for superior corrosion
resistance. The door is glass fiber reinforced
phenylene oxide, and has a shatterproof polycarbonate window, ultraviolet resistant. The overall construction is weatherproof, meets IEC IP53, and provides the environmental protection of NEMA Type 3.

Finish

Case, gray polyester; door, blue textured polyurethane.

Data Label

Aluminum data label fastened to inside of door with pressure sensitive adhesive. Includes space for Customer Tag data up to a maximum of 72 characters and spaces. For additional space, see optional Customer Tag.

Approximate Mass

4.8 kg (10.6 lb), excluding element.


爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

FOXBORO气动控制器43AP系列描述

Foxboro 43AP气动控制器是一种多功能过程仪表控制器,可用于控制压力,温度,流量和液位。与所有过程控制器一样,Foxboro 43AP气动控制器可连续检测过程测量与其设定点之间的差异。43AP型控制器持续检测过程测量与其设定点之间的差异,并产生输出空气信号,该信号是该差异和控制类型的函数。输出信号传输到控制阀或其他控制装置。过程测量,设定点和输出信号在控制器上显示。

 

规格

准确度:

输入指针-合格元素的±0.5%跨度。

输入到输出-取决于使用的测量元素。

重复性:跨度的0.2%。

死区:跨度的0.1%。

输出信号:如所指出的,20至100kPa,3至15psi,或0.2至1.0bar或kg/cm2。

耗气量(正常运行):在标准条件下0.5 m3/h(0.3 cfm)。

输出量表:0至200 kP

环境温度影响:在正常工作条件下,每55°C(100°F)变化在中跨处的最大控制点位移为输入范围的1%。

供应压力影响:在正常操作条件下,每7 kPa(1 psi)变化在中跨处的最大控制点位移为输入跨度的0.2%。

近似质量:4.8千克(10.6磅),不包括元素。

 

特征:

对于高达14 MPa(2000 psi,或140 bar或kg/cm2)的上限值:根据规定,连接为R1/4或1/4 NPT。

对于14 MPa(2000 psi,或140 bar或kg/cm [sup/2])至70 MPa(10 000 psi,或700 bar或k /cm2)的上限值:R1/2螺纹连接或1/2 NPT,如指定的那样。

对于高于70 MPa(10 000 psi,或700 bar或kg/cm2)的上限值:使用9/16-18Aminco®接头。

 

数据标签

用压敏粘合剂固定在门内的铝制数据标签。包括客户标签数据的空间,最多72个字符和空格。

 

表面处理

表壳,灰色涤纶; 门,蓝色纹理聚氨酯

 

FOXBORO气动控制器43AP系列型号解析

image.png 

 

爱泽工业(IZEINDUSTRIES)特价经销、常用FOXBORO型号:

FOXBORO 43AP-PA42C/TA-1A-15FT

FOXBORO 43AP-PA4-2C

FOXBORO 43AP-PA42C/PB-BA

FOXBORO 43AP-PA42C/PB-AA

FOXBORO 43AP-PA42C/PB-AA

FOXBORO 43AP-FA42C/PC-00

FOXBORO 43AP-FA42N-PB-AA-1200

FOXBORO 43AP-PA42-C-F/PC-15

FOXBORO 43AP-FA32N/PB-BA

FOXBORO 43AP-PA42C/PB-CA

FOXBORO 43AP-PA42C/PB-DF

FOXBORO 43AP-PA42C/TA-1A

 

FOXBORO pneumatic controller NEW + ORIGINAL+ ONE YEAR WARRANTY

 

爱泽工业集产品开发、设计、制造、销售于一体,代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的优质渠道。

 

如果有任何关于FOXBORO气动控制器43AP-FA42C-PC-00-IAS-AG的疑问,请随时致电我们,爱泽工业(86-021-31006702)。我们将尽全力解决您的问题。

 

If you have any question for FOXBORO products, please feel free to dial 0086-21-3100 6702/ send request email to sales@ize-industries.com / browse our website: www.ize-industries.com.


FOXBORO气动控制器43AP系列43AP-FA42C-PC-00-IAS-AG型号解析及技术数据

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。