IZE学院 订单查询

0086-21-31006702 联系我们 关于我们 账号注册及登录EN
您当前的位置: 首页 >> 产品中心 >> 机械动力与传动 >> 机械传动 >> 减速机

SITEMA减速机KB系列

请注意:照片可能并不是实际产品,具体请参阅标题和产品规格及所有细节描述。
产品品牌:
型号:KB200
SITEMA减速机KB200
预估货期:
关  键  词:SITEMA减速机KB200
相似产品:
是否有问题?联系我们工作人员
  邮件联系
爱泽工业(ize-industries)并不是本网站所列所有产品的授权代理商或经销商。 本网站使用的所有产品名称,商标,品牌等均属于各自品牌厂家所有。 本网站在产品或图片描述中,出现具有这些名称,商标,品牌等信息的产品仅用于识别目的,并非旨在表明任何与持有者的从属及授权关系。

德国SITEMA减速机 KB200产品信息

目标

KB系列锁定装置用作气缸或其他夹紧杆的活塞杆上的无限可移动锁。KB系列锁定装置吸收两个方向的轴向力

Purpose

The Locking Unit KB is used as an infinitely van able lock on piston rods for cylinders or other clamping rods. The Locking Unit KB absorbs axial forces in both oad directions


轴向表现

载荷在载荷方向1上不受轴向间隙的影响。只要载荷不超过标称夹持力F的80%(KB110约为50%),载荷也不会在载荷方向2上产生轴向间隙超过的情况。负载方向2的轴向间隙约为0.1-0.3毫米。

Axial play

The load is held free from axial play in load direction 1.The load is also free from axial play in load direction 2 as long as the load does not exceed 80%(from KB110 approx 50%)of the nominal holding force F. In the case of exceeding. the axial play in load direction 2 is about 0.1-0.3 mm.


运行条件

KB系列锁定装置设计用于在正常的清洁和干燥车间环境中运行。

如果将端口T连接到清洁干燥的空气(例如油箱),则可以在其他环境条件下运行。如果油污条件严重(磨屑,其他液体等),请联系STEMA。

粘稠的润滑剂和润滑脂可能会降低夹持力。

允许的表面温度为-20℃至+ 60℃。

Operating conditions

The Locking Unit KB is designed to operate in normal clean and dry workshop atmosphere.

Operation in other environmental conditions is possible if at least port T is connected to a clean and dry atmosphere(e.g. tank).In case of heavy soiling conditions (grinding dust. chips, other liquids, etc.), please contact STEMA

Viscous lubricants and grease may reduce the holding force.

The permitted surface temperature is -20℃ to +60℃.


杆的设计和附件

锁定装置KE只有杆在合适的表面上时才能正确操作

ISO容差f7或h6感应淬火。 HRC 56,表面硬化深度:

 ø最大30mm:最小1mm

 ø超过30毫米:最小1.5毫米

 表面粗糙度Rz = 1至4μm(Ra0.15-0.3μm)

 防腐蚀保护,例如镀硬铬.20±10μm,800-1000HV

 导入倒角。

 圆

 ø18毫米至ø80毫米:最小4x30°

 超过80毫米至ø180毫米:最小5x30°

 超过180毫米至ø380毫米:最小7x30°通常。

以下标准杆满足上述要求可被用于

活塞杆(ISO公差栏f7)。

硬铬镀层直线球轴承杆(ISO公差字段h6)

确保棒材的基材具有足够的强度。

确保没有压力棒弯曲的风险。

Design and attachment of the rod

The Locking Unit KE will operate correctly only if the rod hasa suitable surface:

ISO tolerance fald f7 or h6 induction hardened min. HRC 56, surface hardening depth: 

 ø up to 30mm:min.1mm

 ø over 30 mm:min.1.5 mm 

 surface roughness Rz= 1 to 4 μm (Ra 0.15-0.3 um)

 protection against corrosion, e.g. hard chromium plating.20±10μm,800-1000HV

 lead-in chamfer.

 rounded

 ø18 mm up to ø80 mm: min.4x30°

 over 80 mm up to ø180 mm:min.5x30° 

 over 180 mm up to ø380 mm: min 7x30°Often. 

the following standard rods fulfill the above mentioned requirements and can then be used:

Piston rods(ISO tolerance field f7).

hard chrome plated Rods for linear ball bearings (ISO tolerance field h6)

The rod may not be lubricated with grease 

Make sure the base material of the rod is of adequate strength.

Ensure that there is no risk of pressurized rods being kinked.


压力流体

必须符合DIN 51524-2:2006的液压油(HIP)用作压力流体。使用任何其他液体前请咨询SITEMA。

Pressure fluid

Hydraulic oil (HlP)in accordance with DIN 51524-2:2006must be used as pressure fluid. Please consult SITEMA before using any other fluids.


image.png


德国SITEMA减速机 KB200

爱泽工业(IZE INDUSTRIES)特价经销、常用备件型号:

SITEMA减速机KB40

SITEMA减速机KB56

SITEMA减速机KB80

SITEMA减速机KB100

SITEMA减速机KB110

SITEMA减速机KB125

SITEMA减速机KB140

SITEMA减速机KB160

SITEMA减速机KB180

SITEMA减速机KB200


SITEMA KB200 izeindustrialcontrols 爱泽工业.jpg


爱泽工业专业提供德国SITEMA减速机 KB200,SITEMA全系列产品,SITEMA安全捕捉器,SITEMA安全制动器,SITEMA安全锁,SITEMA锁定装置,SITEMA动力冲程等等。


爱泽工业成立于2010年,定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气,液压以及气动解决方案的合作伙伴,我们利用我们的全球协作团队,为客户提供先进解决方案,市场知识以及相关增值服务来帮助优化客户的工作效率,提高可靠性和安全性,致力于成为工业产品和解决方案的首选渠道。


如果有任何关于德国SITEMA减速机 KB200的疑问,请随时与我们联系(021-31006702)。我们将尽全力解决您的问题。


有关德国SITEMA更详细的信息或者购买德国SITEMA相关产品,请联系爱泽工业。

If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.


德国SITEMA减速机 KB200产品特性

免责声明:本网站的布局,设计和编辑版权归©上海爱泽工业设备有限公司(简称ize-industries)所有,保留所有相关权利。 Ize-industries销售工业领域的全新产品,库存产品,并不断开发渠道购买此类产品。 本网站未经所有制造商或商标授权或批准。ize-industries不是所有制造商的授权经销商,附属公司或代表处。除非另有明确说明,否则此处出现的指定商标,品牌名称和品牌均为其各自所有者的财产。