MercuryII5000系列编码器内置了传感器内的所有电子元件。这款紧凑型多功能传感器包括以下功能：
•可编程插值电平和输出带宽
•精度优化-自动优化传感器信号，以提高系统精度并最大限度地提高可重复性
•双向索引输出脉冲，重复性为1LSB
•A-Quad-B三态输出报警，用于低信号
•所有设置和设置参数都存储在非易失性存储器中
•出色的EMI/RFI抗扰度-所有输出均为差分;符合CE标准
可编程插值
该传感器具有可编程插值，可在整个步长（取决于型号）的x4至x16,384范围内进行选择，从而提供可满足应用要求的输出分辨率。此功能允许客户减少库存和现场备件成本，因为可以针对许多不同的分辨率要求和不同的运动轴编程一个电子模块。运动系统开发工程师还可以通过允许在运动系统环路调整和优化期间改变编码器分辨率来实现可编程插值的灵活性。线性分辨率范围从5μm到1.2nm，方便的增量和旋转分辨率从20k CPR到2.68亿CPR。在订购时指定插补值，或使用SmartPrecision II软件其在的现场选择插值
可编程最大输出频率
对于结合了高分辨率和高速度的编码器应用，该传感器每秒支持高达5000万次正交状态变化。通过指定最大输出频率以匹配您的控制器的能力-范围从每秒大约0.098到5000万正交状态变化- Mercury II编码器系统永远不会产生比控制器读取它们更快的编码器计数。在订购时指定编码器的最大输出频率，或使用MicroE的SmartPrecision II软件在现场选择设置。
双重限制
MercuryII包括具有差分TTL输出的光学和电气故障安全独立左右限制。
限制输出是瞬间的。在光学上，光学限制轨道上的全反射是正常的操作条件;光学限制轨道上的信号丢失触发限制输出，使其具有光学故障安全性。限制的TTL输出为低电平有效，使其具有电气故障安全性。限制输出可在订购时配置为低电平有效或高电平有效，或由客户使用SmartPrecision II软件配置，以满足控制器的要求。
可编程低通滤波器
Mercury II 5000具有可编程低通输出滤波器，可在低速应用中提高性能。滤波器可以禁用全带宽或设置为0.01-100kHz，步长为0.01kHz，其中频率为-3dB输出滚降。
解析度
线性：5μm至1.22nm
旋转：20k至268M CPR
准确性
胶带尺：±5μm/m
玻璃秤：
线性：±1μm可用
±1.5μm至±5μm标准
旋转：最高±2.1弧秒
输出
A-quad-B，索引脉冲，双重限制和警报
尺度
相同的磁带或玻璃传感器，线性或旋转
The Mercury II™ 5000 series encoders have all electronics built into the sensor. This compact, versatile sensor includes the following features:
• Programmable interpolation level and output bandwidth
• Accuracy optimization - sensor signals are automatically optimized to improve system accuracy and maximize repeatability
• Bi-directional index output pulse with repeatability of 1LSB
• A-Quad-B tri-state output alarm for low signal
• All settings and setup parameters are stored in non-volatile memory
• Superior EMI/RFI immunity - all outputs are differential; CE compliant
Programmable Interpolation
The sensor has programmable interpolation that is selectable over the range x4 to x16,384 in integer steps (depending on model), providing output resolutions that can be matched to your application requirements. This feature allows customers to reduce inventory and field spare parts costs since one electronics module can be programmed for many different resolution requirements and different motion axes. Motion system development engineers also benefit from the flexibility of programmable interpolation by allowing them to vary the encoder's resolution during motion system loop tuning and optimization. Linear resolutions can range from 5μm to 1.2nm in convenient increments and rotary resolutions from 20k CPR to 268 million CPR. Specify the interpolation value at the time of ordering or select the interpolation at your site using SmartPrecision II Software
Programmable Maximum Output Frequency
For encoder applications combining high resolution and high speed, the sensor supports up to 50 million quadrature state changes per second*. By specifying the maximum output frequency to match your controller’s capability - ranging from approximately 0.098 to 50 million quadrature state changes per second - the Mercury II encoder system will never produce encoder counts faster than your controller can read them. Specify the encoder's maximum output frequency at the time of ordering or select the setting at your site using MicroE's SmartPrecision II Software.
Dual limits
Mercury II includes optically and electrically fail-safe independent left and right limits with differential TTL outputs.
The limit outputs are momentary. Optically, full reflectivity on the optical limit track is the normal operating condition; loss of signal on the optical limit track triggers a limit output, making them optically fail-safe.The TTL output for limits is active-low, making them electrically fail-safe. Limit outputs can be configured for active-low or active-high at the time of ordering, or by the customer using SmartPrecision II Software, to match your controller’s requirement.
Programmable Low Pass Filter
The Mercury II 5000 has a programmable low-pass output filter for enhanced performance in low speed applications. The filter can be disabled for full bandwidth or set from 0.01 - 100kHz in steps of 0.01kHz, where the frequency is -3dB output roll off.
Resolution
Linear: 5μm to 1.22nm
Rotary: 20k to 268M CPR
Accuracy
Tape Scale:±5μm/m
Glass Scales:
Linear:±1μm available
±1.5μm to±5μm standard
Rotary: Up to±2.1 arc-sec
Outputs
A-quad-B, Index Pulse,Dual Limits, and Alarm
Scales
Same Sensor for Tape or Glass,Linear or Rotary
MicroE编码器MercuryII5000系列型号说明
爱泽工业(IZE_INDUSTRIES)特价经销、常用MICROE编码器型号：
MICROE编码器MII5510-AB-200-4-1-0
MICROE编码器MII5510-AB-400-1-1-0
MICROE编码器MII5510-AB-400-3-1-0
MICROE编码器MII5810-AB-16384-1-1-0
MICROE编码器MII5710-AB-4000-1-1-0
爱泽工业成立于2010年，定位于向先进制造工业提供高端制造技术和设备。代理经营世界先进的电气自动化、机械与传动、流体控制、仪器仪表、工具等产品。作为电气，液压以及气动解决方案的合作伙伴，我们利用我们的全球协作团队，为客户提供先进解决方案，市场知识以及相关增值服务来帮助优化客户的工作效率，提高可靠性和安全性，致力于成为工业产品和解决方案的优质渠道。
如果有任何MicroE编码器MercuryII5000系列 示例MII5510-AB-200-4-1-0的疑问，请随时致电我们，爱泽工业（021-31006702）。我们将尽全力解决您的问题。
有关MicroE编码器MercuryII5000系列 示例MII5510-AB-200-4-1-0更详细的信息或者美国MicroE相关产品，请致电爱泽工业。
If you have any question, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
MicroE编码器MercuryII5000系列型号说明及产品描述
